VU Meter Man

Build a 5 step LED stereo VU meter man with mustache.
Steps
  1. Overview
  2. Plan it out
  3. Layout the stripboard
  4. Solder the bottom IC
  5. Connect the right LEDs
  6. Add the second IC
  7. Connect the left LEDs
  8. Test the VU
Categories
Tayda Electronics Kits, DIY Projects, Learning Projects
Created by Alexi
Status: Active
C44d39772388d7917f959bae7c92c1a5?s=30

Layout the stripboard Step 3 of 8

I always take extra time to properly plan out the stripboard design. I made some design decisons to connect the proper pin headers to the top led board. I would like to try other configurations in particular for the inside out mustache, but this configuration seemed to work pretty well for the outside in layout.

Photo-1
Next Page >>
<< Prev Page