English ManThis pedal emulates a VOX AC amplifier working at the limit. It has the ability to work as a clean boost or an overdrive depending on the volume and gain control, offering a great dynamic response and open sound.
ENCLOSURE AND WIRING Step 4 of 4
You should install all the parts (DC and 3.5 jack connectors, 9V battery clip, 3PDT foot switch, assembled PCB...) in the enclosure. The led diode and its holder can be moved to the place where you want, just respect the polarity. The round side and longest leg is the anode (marked as a square pad in the PCB). It is possible that you need to remove the little metal tag from the potentiometers in order to easily install them in an enclosure.
You can create your own element distribution and use many types of enclosures. It is recommended to use a metal enclosure and connect it to the ground in order to attenuate the noise (usually the GND of tthe input and output jacks are in contact with the enclosure). For this project, you can use the 1590B enclosure. After the drilling, you can paint and decorate the enclosure as you desire. Finally, install all the elements and you can beguin with the wiring.
For the wiring, you should use 24 AWG stranded wire. Wire all the elements as indicated in the following diagram, for the ground (GND) no matter the order you use if all the elements are connected.You can power up the circuit with DC adapter (9V) or a battery. The diagram shows the connections to use the DC connector as negative tip (standardized Boss style 2.1 mm with a negative tip orientation).
WIRING WITH PCB FOR 3PDT FOOTSWITCH
You can use the PCB for 3PDT footswitch. It will help you to wire all the components, keep a neat circuit and reduce the noise. The PCB also includes pads for the led and its current limiter resistor.
WIRING WITH PCB FOR 1590B ENCLOSURE
If you are going to use a 1590B enclosure this board will definitely save your time and help you to build your pedal. Led, jacks and footswitch are mounted on the PCB, being only necessary to wire the battery and the effect PCB. You can download and print the drilling template, visit PCB for 1590B enclosure for more details.