PCB for 1590B enclosure

This board will definitely save your time and help you to build your DIY guitar pedal in the 1590B enclosure. Led, jacks and footswitch are mounted on the PCB, being only necessary to wire the battery and the effect PCB.
Steps

Created by DHEA
Status: Active
Cfbfe5913a91eb0b73dda7d6f6ecab58?s=30

PCB for 1590B enclosure Step 1 of 5

Dhe14_1

This board will definitely save your time and help you to build your DIY guitar pedal in the 1590B enclosure. Led, jacks and footswitch are mounted on the PCB, being only necessary to wire the battery and the effect PCB. The PCB also includes power supply filtering and reverse polarity protection.

COMPONENT LIST

1 x PCB for 1590B Enclosure DIY
C1     100u     100UF 35V 105C RADIAL ELECTROLYTIC CAPACITOR 6X11MM
C2     100n     100NF 0.1UF 100V 5% POLYESTER FILM BOX TYPE CAPACITOR
D1     1N4001     1N4001 DIODE 1A 50V
D2     1N4001     1N4001 DIODE 1A 50V
R1     2.2k    2.2K OHM 1/4W 1% METAL FILM RESISTOR
R2     47Ohm    47 OHM 1/4W 1% METAL FILM RESISTOR
LED     LED 3MM GREEN    with     3MM BEZEL LED HOLDER CHROME METAL
DC    DC POWER JACK 2.1MM BARREL-TYPE PCB MOUNT
JACK IN     6.35MM 1/4" STEREO INSULATED SWITCHED SOCKET JACK PCB
JACK OUT     6.35MM 1/4" STEREO INSULATED SWITCHED SOCKET JACK PCB
3PDT     3PDT STOMP FOOT / PEDAL SWITCH
BATTERY    9V 9-VOLT BATTERY CLIP / CONNECTOR SNAP

Check Out The Forum