USB PORTABLE CHARGER!!!!

USB CHARGER KIT: Charges USB Devices
Steps
  1. Overview
  2. Intro: USB Charger
  3. STEP 1: Soldering L78M05CV Voltage Regulator To Board
  4. STEP 2: SOLDER SCRAP METTEL PINS TO FEMALE USB
  5. STEP 3: Solder Female USB To Board
  6. STEP 4: Adding The Power
  7. STEP 5: SOLDER SCRAP METTEL PINS TO Toggle Switch
  8. STEP 6: Solder Toggle Switch To Board & LED
  9. STEP 7: Solder Resistor 1
  10. STEP 8: Solder 2nd Resistor
  11. Step 9: TEST TIME
  12. STEP 10: Line Tin With Electrical Tape
  13. Step 11: ENJOY =]
Created by Maxx
Status: Active
675b5ba89f7a8c5785fb960e601503d5?s=30

STEP 2: SOLDER SCRAP METTEL PINS TO FEMALE USB Step 4 of 13

SOLDER SCRAP METEL PINS TO FEMALE USB

THEN TRIM PINS TO MAKE IT LOOK NEAT

(THIS IS TO MAKE IT EASIER TO SOLDER TO BOARD IN THE NEXT STEP)

Ideas for scrap mettle

1. LED Legs

2. pins from old components

3. Metel Wire

 

Next Page >>
<< Prev Page

Products