USB PORTABLE CHARGER!!!!

USB CHARGER KIT: Charges USB Devices
Steps
  1. Overview
  2. Intro: USB Charger
  3. STEP 1: Soldering L78M05CV Voltage Regulator To Board
  4. STEP 2: SOLDER SCRAP METTEL PINS TO FEMALE USB
  5. STEP 3: Solder Female USB To Board
  6. STEP 4: Adding The Power
  7. STEP 5: SOLDER SCRAP METTEL PINS TO Toggle Switch
  8. STEP 6: Solder Toggle Switch To Board & LED
  9. STEP 7: Solder Resistor 1
  10. STEP 8: Solder 2nd Resistor
  11. Step 9: TEST TIME
  12. STEP 10: Line Tin With Electrical Tape
  13. Step 11: ENJOY =]
Created by Maxx
Status: Active
675b5ba89f7a8c5785fb960e601503d5?s=30

STEP 10: Line Tin With Electrical Tape Step 12 of 13

Line Tin With Electrical Tape To Prevent Shorting Out

Or Put HeatShrink Tubbing On All Wires

Next Page >>
<< Prev Page

Products