Champ
This pedal emulates the sound and dynamics of a cranked Fender Tweed Champ.Steps
Categories
Status: Active
Designators and components Step 2 of 5
PCB DESIGNATORS
PCB GUITAR BOOST PCB
Resistors
R1 1M 1M OHM 1/4W 1% METAL FILM RESISTOR
R2 2.2M 2.2M OHM 1/4W 1% METAL FILM RESISTOR
R3 Jumper
R5 330 330 OHM 1/4W 1% METAL FILM RESISTOR
R6 Jumper
R7 3.3k 3.3K OHM 1/4W 1% METAL FILM RESISTOR
R8 330 330 OHM 1/4W 1% METAL FILM RESISTOR
Capacitors
C1 22n 22NF 100V 5% POLYESTER FILM BOX TYPE CAPACITOR
C3 100n 100NF 100V 5% POLYESTER FILM BOX TYPE CAPACITOR
C4 47u 47UF 25V ELECTROLYTIC CAPACITOR 5X11MM
Transistor
Q1 2N5088 2N5088 GERENAL PURPOSE TRANSISTOR
Diodes
D1 1N34 1N34 SWITCHING SIGNAL DIODE
D2 1N34 1N34 SWITCHING SIGNAL DIODE
Potentiometer
VOL 100k-A 100K OHM Logarithmic POTENTIOMETER
PCB
PCB SCHEMATIC
The following table shows several projects that you can build with the DH.A8 PCB. Note that some components are jumpers or are not mounted.