Treble Booster Brian May

This pedal boosts your treble with a very nice sounding. It is a very classic DIY project very close to the Rangemaster using silicon transistors. You can use it to add some treble or overdrive your amp with a great sound.
Steps

Created by DHEA
Status: Active
Cfbfe5913a91eb0b73dda7d6f6ecab58?s=30

Treble Booster Brian May Step 1 of 4

Dha8_assembled

Effect type: boost

Pedal description

This pedal boosts your treble with a very nice sounding. It is a very classic DIY project very close to the Rangemaster using silicon transistors. You can use it to add some treble or overdrive your amp with a great sound.

Controls

  • Gain: controls the gain

Kit contents

Capacitors    
1x     4.7NF 0.0047UF 100V 5% POLYESTER FILM BOX TYPE CAPACITOR
1x     47NF 0.047UF 100V 5% POLYESTER FILM BOX TYPE CAPACITOR
1x     1NF 0.001UF 100V 5% POLYESTER FILM BOX TYPE CAPACITOR
1x     47UF 50V 105C RADIAL ELECTROLYTIC CAPACITOR 6X11MM
Transistor    
1x     2N5088 NPN GENERAL PURPOSE TRANSISTOR
Resistors    
1x     120K OHM 1/4W 1% METAL FILM RESISTOR
1x     100K OHM 1/4W 1% METAL FILM RESISTOR
1x     1K OHM 1/4W 1% METAL FILM RESISTOR
1x     22K OHM 1/4W 1% METAL FILM RESISTOR
1x     6.8K OHM 1/4W 1% METAL FILM RESISTOR
1x     100 OHM 1/4W 1% METAL FILM RESISTOR
1x     2.2K OHM 1/4W 1% METAL FILM RESISTORPotentiometer    
1x     100K OHM LINEAR TAPER POTENTIOMETER
Others    
1x    GUITAR BOOST DIY PCB GUITAR EFFECT
1x    1590B STYLE ALUMINUM DIECAST ENCLOSURE
1x    3MM BEZEL LED HOLDER CHROME METAL
1x    LED 3MM RED
1x    9V 9-VOLT BATTERY CLIP / CONNECTOR SNAP
1x    DC POWER JACK 2.1MM ENCLOSED FRAME WITH SWITCH
1x    6.35MM 1/4" MONO CHASSIS SOCKET / JACK
1x    6.35MM 1/4" STEREO CHASSIS SOCKET / JACK 3 TERMINALS
1x    3PDT STOMP FOOT / PEDAL SWITCH
1x    DAVIES 1510 CLONE BLACK KNOB
1x    AWG 22 BLACK HOOK-UP WIRE 1FT (30CM) STRANDED            
1x    AWG 22 RED HOOK-UP WIRE 1FT (30CM) STRANDED            
1x    AWG 22 WHITE HOOK-UP WIRE 1FT (30CM) STRANDED  

Check Out The Forum