Fuzz Factory

The Fuzz Factory is a five-knob fuzz pedal with huge range of sound possibilities. This is classic DIY pedal project that can be built with either germanium or silicon transistors.
Steps

Created by DHEA
Status: Active
Cfbfe5913a91eb0b73dda7d6f6ecab58?s=30

Fuzz Factory Step 1 of 4

Dhc2_assembled

The Fuzz Factory is a five-knob fuzz pedal with huge range of sound possibilities. This is classic DIY pedal project that can be built with either germanium or silicon transistors.

Materials list

1x    FUZZ FACTORY DIY PCB
3x    10UF 50V 105C RADIAL ELECTROLYTIC CAPACITOR 5X11MM
1x    100NF 0.1UF 100V 5% POLYESTER FILM BOX TYPE CAPACITOR
1x    0.47UF 50V 105C RADIAL ELECTROLYTIC CAPACITOR 5X11MM

1x    LED 3MM GREEN
1x    1N4001 DIODE 1A 50V

1x    2N3904 NPN GENERAL PURPOSE TRANSISTOR
2x    2N3906 PNP GENERAL PURPOSE TRANSISTOR

2X    220K OHM 1/4W 1% METAL FILM RESISTOR
1x    10K OHM 1/4W 1% METAL FILM RESISTOR
1x    470 OHM 1/4W 1% METAL FILM RESISTOR
1x    47K OHM 1/4W 1% METAL FILM RESISTOR
1x    5.1K OHM 1/4W 1% METAL FILM RESISTOR
1x    1M OHM 1/4W 1% METAL FILM RESISTOR
1x    1.5K OHM 1/4W 1% METAL FILM RESISTOR

2X    5K OHM LINEAR TAPER POTENTIOMETER
3X    10K OHM LINEAR TAPER POTENTIOMETER