COT50

The COT 50 gives a boost to the guitar with a unique tube-like sound. It can be used as a clean boost, crunch boost or overdrive. It has only one knob to control the amount of gain.
Steps
  1. Overview
  2. Designators and components
  3. PCB assembly
  4. Enclosure and wiring
  5. Enclosure drilling
Categories
Tayda Electronics Kits, DIY Projects, DIY Guitar Effects
Created by DHEA
Status: Active
6ad5cfedb16d6a272994ad5c2b2b82c7?s=30

Designators and components Step 2 of 5

PCB DESIGNATORS

PCB          COT50 DIY PCB

Resistors        
R1    1M        1M OHM 1/4W 1% METAL FILM RESISTOR
R2    2.2M     2.2M OHM 1/4W 1% METAL FILM RESISTOR
R3    3.3k      3.3K OHM 1/4W 1% METAL FILM RESISTOR
R4    47         47 OHM 1/4W 1% METAL FILM RESISTOR
R5    330       330 OHM 1/4W 1% METAL FILM RESISTOR

Capacitors        
C1    47n         47NF 100V 5% POLYESTER FILM BOX TYPE CAPACITOR
C3    47u         47UF 25V ELECTROLYTIC CAPACITOR 5X11MM
C4    100n       100NF 100V 5% POLYESTER FILM BOX TYPE CAPACITOR
C5    47n         47NF 100V 5% POLYESTER FILM BOX TYPE CAPACITOR (Optional)

Diodes        
D1    1N60      1N60 schottky DIODE
D2    1N60      1N60 SCHOTTKY DIODE

Transistors
Q1    2N5088     2N5088 GERENAL PURPOSE TRANSISTOR

Potentiometers
GAIN    1k-B      1K ohm linear TAPER POTENTIOMETER

PCB

   

 

PCB SCHEMATIC

 

Next Page >>
<< Prev Page

Products